CE

1900 mm Lifting height
3000 kg lifting capacity 220 volt/1ph  electr/hydraulic

The int-208SE Double Parker is a 4 columns lift (park lift) although tested
and certified as a workshop lift, this lift, we do sell the most for double
parking for lack of space, so two cars on the place of one. Especially in
the Classiccar world this is a common solution, because most Classiccar
enthusiasts also love to work on their Classiccar and if so two birds with
one stone. But in other areas, this lift is very popular as additional parking.
such as leasing companies, car companies, fleet owners. Also home use
by individuals is common, By using the free space in the top of your garage
there may be still be two cars inside your garage. or in the most cases
the Classiccar on top of the lift in the winter months and weekday car just
below. Because of the attractive low price of this lift is
ideal for home use.
The lift can be made moveable by the optional wheelset. The brackets
with wheels will be mounted under the crossbeam in every corner, lower the
lift and by it’s own weight the columns will come up free from the floor and
the lift stands on four wheels and is so very easy to move around. Equiped
with the latest CE certification the lift is for sale in the EC admitted countries.
(See photo below with pop-ups in different CE requirements)

By the special version of the ramps, the entrance
of the ramps is very beneficail for low cars .
Because the ramps can be folded in half, it gives
extra space under and infron of the lift.
The ramps provide a exit security ,when the lift is
raising

Controlbox

Emergency switch: on / off
Up: Lift lifts to desired height.
Down lock: Lift drops in the next lock
Down: Lift first goes up a few cm then
can be unlocked and lowered automatically.
Lift drops to foot protection switch, stops and gives an alarm signal
by pressing Down lock now, the lift drops to the floor

Locks

Each column is equipped with automatic
locking, these click in at every 10 cm
that the lift is higher, so the lift is always
protects against unwanted lowering. In the event of a cable break
or hydraulic leakage the lift can lower max 10 cm
and then blocked.
With normal lowering, the locks become
automatically unlocked and released so that
the liftlowers all the way to the floor

Slack-cable device

Because the lift is provided on all 4 corners
of a slack cable protection, or
security, the lift will stop immediately as soon as
one of the corners will get stuck and does not lower

in line with the others 

Endswitches

Adjustable limit switch so that lift height
can be set.
Foot protection switch. When descending, stops
the lift at a height of 20 cm, again at
pressing down the lift continues with
alarm signal

 ____________________________________________

Oildrip tray

Each lift is supplied with 3 dripping trays

Particularities

anti-slip-off protection.

Ensures that the cable cannot run off the wheel

 ____________________________________________

Covers 

Protective cover protects wheel and cable

 ____________________________________________

Motorunit

Motor unit concealed in platform.
Goes up and down, none
loose hoses and wires.
lift does not get wider due to motor unit

 ____________________________________________

 ____________________________________________

Options

 ____________________________________________

LED-lighting

 
set of 6 fixtures incl. connection-mounting set

 ____________________________________________

Wheelset

Set of 4 wheels to move the lift

 ____________________________________________

Extra long aluminium ramps

special for extra low cars 

2.0 mtr long with a handle

set of 2 incl. brackets

 ____________________________________________

Oildripping tray  

oildrip tray 95 x 63 cm
to close the open space between the runways
you need a extra 4 trays to close the complete lift

 ____________________________________________

To check whether your ceiling is high enough to actually park 2 cars above each other with this lift, you can use the table / calculation below

   93  -  103 cm       the minimum ceiling height = 118 cm + height of the upper car

 103  -  113 cm       the minimum ceiling height = 128 cm + height of the upper car

 113  -  123 cm       the minimum ceiling height = 138 cm + height of the upper car

 123  -  133 cm       the minimum ceiling height = 148 cm + height of the upper car

 133  -  143 cm       the minimum ceiling height = 158 cm + height of the upper car

 143  -  153 cm       the minimum ceiling height = 168 cm + height of the upper car

 153  -  163 cm       the minimum ceiling height = 178 cm + height of the upper car

 163  -  173 cm       the minimum ceiling height = 188 cm + height of the upper car

Example ;

car 1: bottom is 129 cm high.

car 2: the top is 135 cm high.

129 cm falls between 123 - 133 cm

minimum height for the ceiling is then 148 cm + 135 cm (=height top car) = 283 cm

Dimensions

 ____________________________________________

    Technical Data
load                3000 kg
lifting height  1900 mm
current           230 volts 1ph
fuse                16C (slow)

operation      electro / hydraulic  
color              gray Ral 7011
lock               Automatically every 10 cm

 ____________________________________________

Prices

€ 2.595=        int-208SE  
on request      Transport
on request      Installation

€    250, =      Casterset

€    295, =      LED lighting  
€   12,50         oil drip tray 

€     450,=      set extra long aluminium ramps

All prices are excluding VAT

 ____________________________________________

 ____________________________________________

installation video

Gallery

 ____________________________________________

Parkeerbruggen - parkeersystemen
ParkBühnen-Parksysteme
Parkinglifts - parkingsystems

Intern BV
Overveld 19
3848 BT Harderwijk
Nederland

Tel: 00-31-(0)341-430114
info@internbv.nl